Full range

Everything we make, item by item

The category pages give you the short version. This is the long one — the complete list of what comes off our lines, written the way a sourcing team searches rather than the way a catalogue is laid out.

Request a Quote Build something custom

Read this as manufacturing scope, not a stock list

Almost nothing here is sold from inventory. Each line is a product type we tool, build and have shipped — dimensions, finishes, fabrics and packaging are set per programme. If your item is not named below, it is usually still buildable; the list is a starting point for a conversation, not a menu.

Collections

Seven families, one engineering language

Most buyers want a range that hangs together rather than seven unrelated items. Our collections share frame sections, hardware and finishing systems, so a programme can grow without retooling from scratch.

01

Emberline

Powder-coated aluminum seating built around an integrated fire table — sofas, sectionals, swivel chairs and matching tank cabinets.

02

Teakform

Aluminum frames with teak armrests, trim and table tops, for programmes that want warmth without a full timber bill of materials.

03

Sintera

Sintered stone tops on aluminum structures — fire tables, dining and occasional, with the surface durability of stone at shippable weight.

04

Castone

GFRC fire bowls, fire tables and seating in concrete, ash and sand colourways, cast rather than clad.

05

Polyform

Solid HDPE Adirondacks, loungers, dining and bar furniture in single and two-tone colourways, with no finish to maintain.

06

Firecore

Multi-material fire pit tables — aluminum, ceramic, stainless, stone-effect and wicker base — plus ethanol, wood-burning and remote-control units.

07

Galley

Modular outdoor kitchen islands and grill cabinets, cut to the appliance models your programme specifies.

Collections are a starting point, not a constraint. Every one of them has been rebuilt to a customer's own design, dimensions and brand identity under OEM and ODM terms.

01

Aluminum seating & lounge

Extruded aluminum frames, welded and finished in-house, upholstered with cushions, sling or rope to your specification. Single pieces or complete collections sharing one design language.

Seating

  • Club chair / single sofa
  • Loveseat / two-seat sofa
  • Three-seat sofa
  • Corner sofa
  • Modular L-shaped sectional
  • Sectional with integrated fire table
  • Swivel chair
  • Swivel rocker
  • Deep-seat lounge chair
  • Armless middle module
  • Ottoman / footstool
  • Bench seating

Lounging

  • Chaise lounge
  • Single sun lounger
  • Stacking lounger
  • Wheeled lounger
  • Daybed
  • Adjustable-back lounger

Seating construction options

  • Cushioned deep seating
  • Sling / textilene seat and back
  • Rope and cord weave
  • Woven wicker over aluminum
  • Aluminum slat seat
  • HDPE slat seat on aluminum frame
  • Teak-faced armrests and trim

02

Dining, bar & occasional tables

Table structures are where most outdoor programmes go wrong — tops move, frames rack, fixings corrode. We build the frame and fit the top as one engineered assembly rather than two bought-in halves.

Dining

  • Dining chair, armed and armless
  • Stacking dining chair
  • Swivel dining chair
  • Rectangular dining table
  • Square dining table
  • Round dining table
  • Extension / slide-top dining table
  • Complete dining sets

Bar height

  • Bar chair / bar stool
  • Counter-height stool
  • Bar table
  • Pub / bistro table

Occasional

  • Coffee table
  • Side table / end table
  • Nesting table set
  • Console table
  • Serving cart / trolley
  • Storage box / deck box

Table top materials

  • Teak and teak-look timber
  • Powder-coated aluminum slat
  • Sintered stone
  • Ceramic
  • Rock plate
  • Stone paper
  • Marble-effect heat-transfer
  • Tempered and toughened glass
  • HDPE board
  • Stainless steel

03

Fire pit tables & fire features

The largest single part of our range. Enclosures are built in aluminum, stone composite or GFRC and sized around the burner and control package the programme specifies. Typical output for gas units runs 37,000–65,000 BTU.

By format

  • Rectangular fire pit table
  • Square fire pit table
  • Round fire pit table
  • Oval fire pit table
  • Octagonal fire pit table
  • Fire pit bowl
  • Coffee-height fire table
  • Dining-height fire pit table
  • Bar-height fire table
  • Retractable slide-top fire pit dining table
  • Stepped fireplace table
  • Wall and floor-standing fireplace

By enclosure material

  • Powder-coated aluminum
  • Aluminum with teak trim
  • Sintered stone
  • Ceramic top
  • Stainless steel top
  • GFRC / glassfibre reinforced concrete
  • Concrete-effect heat-transfer finish
  • Woven wicker base
  • Rock plate and stone paper

By fuel and control

  • Propane, with concealed tank
  • Natural gas
  • Electronic ignition
  • Match-lit
  • Remote-control ignition
  • Ethanol / alcohol burner
  • Wood-burning

Fire table ancillaries

  • Gas tank cover / tank cabinet
  • Matching side table
  • Glass wind guard
  • Burner lid and cover
  • Protective furniture cover

04

Gas & ethanol burner kits

Burner assemblies in 304 stainless steel, supplied as a kit with regulator and ignition. These are the parts a buyer cannot afford to get wrong, so they are specified by certificate rather than by description.

Gas burner kits

  • Square burner — 45,000–55,000 BTU, 16"–19"
  • Round burner — 37,000–55,000 BTU, 13"–25"
  • Rectangular burner — 45,000–65,000 BTU, to 36"×8"
  • 304 stainless steel construction
  • Electronic ignitor or match-lit
  • 1,200 mm regulator and hose
  • Natural gas or LPG configuration

Ethanol burner inserts

  • Square ethanol burner
  • Round ethanol burner
  • Conical ethanol burner
  • Circular tabletop burner
  • 304 stainless steel construction

CSA-approved burner certificates

  • Ulc-PZ19-C-E/M
  • Ulc-PZ17-B-E/M
  • Ulc-PY18-C-E/M
  • Ulc-PC30-A-E/M
  • 21-3110

Certification covers a defined burner, valve train and gas configuration. If your design changes any of those, tell us early — we run a CSA-qualified gas testing laboratory on site, so re-examination does not mean shipping samples across the world. See our certifications.

05

Outdoor kitchen islands & grill cabinets

Modular cabinet carcasses in aluminum, built as single units or as runs that lock together on site. Appliance cut-outs are made to the grill, sink and refrigerator models your programme specifies.

Modules

  • BBQ / grill storage cabinet
  • Two-drawer storage module
  • Three-drawer storage module
  • Sink module
  • Refrigerator module
  • Open shelving module
  • Corner and return module
  • Mobile cart with castors

Complete islands

  • Straight run island
  • L-shaped island
  • Island with grill and sink
  • Island with grill, sink and refrigerator
  • Bar-top overhang island

Fronts, tops and finishes

  • Flat and fluted door fronts
  • Timber-effect fronts
  • Stainless steel door and drawer faces
  • Sintered stone worktop
  • Stainless steel worktop
  • Powder-coat colours to your palette

06

HDPE & poly outdoor furniture

Solid HDPE board on aluminum or all-poly construction, in single and two-tone colourways. The material that survives chlorine, salt air and commercial cleaning without a finish to maintain.

Products

  • Adirondack chair
  • Rocking Adirondack chair
  • Folding Adirondack chair
  • Adirondack set with side table
  • Single lounger / chaise
  • Dining chair
  • Dining table
  • Bar chair
  • Bar table
  • Side table
  • Bench
  • Ottoman

Standard colourways

  • Black
  • White
  • Light grey
  • Dark grey
  • Red
  • Blue
  • Teak / imitation wood
  • Two-tone wood and grey
  • Custom colour to volume

07

Sintered stone & GFRC

Stone and stone-effect construction for buyers who want the weight and surface of concrete or natural stone without the freight and breakage that come with the real thing.

Sintered stone

  • Sintered stone fire pit table
  • Sintered stone dining table
  • Sintered stone coffee and side table
  • Sintered stone worktops for kitchen islands
  • Sintered stone furniture collections

GFRC

  • GFRC fire pit table
  • GFRC fire bowl
  • GFRC seating
  • GFRC tank cover
  • GFRC planters and surrounds
  • Concrete, ash and sand colourways

08

Frames, components & sub-assemblies

If you run your own assembly or upholstery, buy the metal rather than the finished item. We ship kitted, finished and labelled to your bill of materials.

Fabricated parts

  • Welded chair and sofa frames
  • Welded table bases
  • Legs and leg assemblies
  • Armrests and arm caps
  • Seat and back frames
  • Sling rails and spline channels
  • Brackets, gussets and connectors
  • Stretchers and cross rails
  • Cut-to-length tube and profile
  • CNC-machined parts
  • Punched and stamped parts
  • Bent and formed sections

How it ships

  • Loose finished components
  • Kitted by bill of materials
  • Welded sub-assemblies
  • Knock-down flat packs
  • Hardware packs included

09

Custom aluminum profiles

The bottom of the supply chain. Your cross-section, from die development to finished, cut and packed bar.

Scope

  • Die design and development
  • New mold tooling in about five days
  • Solid profiles
  • Hollow and multi-cavity profiles
  • Round, square and rectangular tube
  • Angle, channel and flat bar
  • Heat treatment and ageing
  • Cut-to-length service
  • Mill finish or finished bar

10

Lighting & accessories

The items that turn a product into a programme — and the ones most often forgotten until the first container is being packed.

Lighting

  • Solar ground light
  • Solar bollard and path light
  • Decorative lantern
  • Wall-mounted fireplace unit

Fire media & hardware

  • Fire glass, reflective and matte
  • Fire glass mixed kits
  • Lava rock
  • Ceramic fire stones
  • Round, square and rectangular glass wind guards
  • Burner covers and lids
  • Ignition and control spares

Soft goods & packing

  • Cushions and cushion covers
  • Sling and textilene panels
  • Protective furniture covers
  • Retail-ready and drop-ship cartons
  • Assembly instructions and hardware bags

11

Materials & finishes

Anything below can be combined across the range. Where a finish carries a warranty expectation, we agree the test standard with you before tooling rather than after the first complaint.

Structure

  • Extruded aluminum, 6000 series
  • Cast aluminum elements
  • 304 stainless steel
  • Galvanised and coated steel
  • Solid HDPE board
  • GFRC
  • Sintered stone and ceramic
  • Teak and hardwood trim

Surface finishes

  • Powder coating, matte and textured
  • Two-coat and primer systems
  • Wood-grain heat transfer
  • Stone and marble effect transfer
  • Anodising
  • Polishing and brushing
  • Sandblasting
  • Electrophoretic coating

Soft materials

  • Textilene and sling fabric
  • Olefin and acrylic outdoor fabric
  • Quick-dry foam
  • Rope, cord and PE wicker
  • Customer-nominated fabric suppliers

Found it, or close to it?

Send the item, the annual volume and any drawing or photo you have. You will get a real answer on tooling, lead time and cost within one business day.

Request a Quote Back to categories